Welcome to DT TABERNACLE!
common problem
What are the characteristics of DT22 cool insulation glue?

(1) DT22 cool and cold insulation glue is used for the outer wall of the storage tank, replacing the traditional water spray to cool down, saving water and energy saving effect obviously; and reducing the temperature difference between low and low boiling oil or chemical products during the high temperature season to form respiratory loss and reduce the emission of fugitive gas to the environment Compared with silver paint, it can reduce the respiratory loss of the medium in the tank by 1‰; (2) DT22 series cool and heat insulation adhesive has excellent anti-sunlight radiation and lower heat transfer performance, and has been successfully applied in petrochemical systems. More than 10 years; (3) DT22-2 cool insulation glue color appearance is white matt type, with good anti-staining and decorative; (4) its thermal insulation coating has good flame retardant Sex, suitable for application on the outer surface of low-boiling medium storage tanks; (5) DT22-2 cool insulation rubber has a good complex

What are the requirements for the processing of the substrate when the DT22-2 co

(1) Execution standard "Standard and Descaling Grade of Steel Surface Before Painting" (GB8923-88); (2) Surface Treatment: The surface treatment standard for sandblasting is Sa21/2 or the standard for power tools and manual descaling is St3 grade; (3) Intercoating application interval (calculated by surface treatment start time) ≤ 4h. (4) The surface roughness is 40-70 μm (less than 1/3 of the total thickness of the coating). (5) Construction conditions: ambient temperature ≥ 5 ° C, relative humidity ≤ 85%, to avoid rain, wind and sand weather, morning or night construction.

Why is Datong insulation coating more expensive than ordinary coatings? Where is

Because Chase's coatings first have thermal insulation compared to other coatings, and secondly coatings. Through its working principle of reflecting the heat of sunlight, the thermal insulation coating can effectively reduce the temperature of the outer surface of the building and the interior of the building. In addition, the design standard to be considered when designing a building is “green building”. The use of thermal insulation coating can improve the design score (more than 70% of road pavement, building roof, solar radiation reflection coefficient is not less than 0.4, get 2 The thermal performance of the envelope structure is 5 percent higher than the current national energy efficiency design standards for building energy, and 5 points for 10%.) Therefore, in the design of the project, the use of thermal insulation coating can be more Be sure to meet the evaluation requirements of “green building”. At the same time, the design of the thermal insulation coating is used,


What is the thermal insulation effect of thermal insulation coatings compared to

Compared with ordinary coatings, thermal insulation coatings can better reduce the internal temperature rise of buildings caused by solar radiant heat, and effectively save the cost of refrigeration and air conditioning. It is an ideal energy-saving building material. In general, the thermal insulation coating can reduce the peak temperature of the outer surface of the roof by 10-20 ° C, and reduce the peak temperature of the outer surface of the outer wall by 5-15 ° C, which significantly improves the thermal inertia.


What is the thermal insulation effect of thermal insulation coatings compared to

Compared with ordinary coatings, thermal insulation coatings can better reduce the internal temperature rise of buildings caused by solar radiant heat, and effectively save the cost of refrigeration and air conditioning. It is an ideal energy-saving building material. In general, the thermal insulation coating can reduce the peak temperature of the outer surface of the roof by 10-20 ° C, and reduce the peak temperature of the outer surface of the outer wall by 5-15 ° C, which significantly improves the thermal inertia.


What is the principle of Datong DT22 series reflective thermal insulation coatin

DT22 series of reflective thermal insulation coatings have high solar reflectance, near infrared reflectance and hemispherical emissivity. By reflecting the heat of sunlight, it reduces the thermal load of buildings and structures, and reduces the temperature rise inside the building caused by solar radiant heat.

DT TABERNACLE © 2000-2016

OEM One-Stop Service for thermal insulation coating.
Products can be passed by wall inspection.
Technical specification for building solar -
reflective coating(thermal insulation coating).
Please consult 400-775-0275 for details.